To the Standard

When manufacturing and installing your steel, these standards are the rules by which Pengelly Engineers operates:

NZBC F5/AS1 Construction and demolition hazards
AS1111.1 ISO metric hexagon bolts and screws – Product grade C – Bolts
AS 1111.2 ISO metric hexagon bolts and screws – Product grade C – Screws
AS1112.1 ISO metric hexagon nuts – Style 1 – Product grades A and B
AS/NZS 1163 Cold-formed structural steel hollow sections
AS/NZS 1214 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
AS/NZS 1252.1  High-strength steel fastener assemblies for structural engineering – Bolts, nuts and washers – Technical requirements
AS 1397  Continuous hot-dip metallic coated steel sheet and strip – Coatings of zinc and zinc alloyed with aluminium and magnesium.
AS/NZS 1554.1 Structural steel welding – Welding of steel structures
AS/NZS 1554.2 Structural steel welding – Stud welding (steel studs to steel)
AS/NZS 1154.3 Structural steel welding – Welding of reinforcing steel
AS/NZS 1154.4 Structural steel welding – Welding of high strength quenched and tempered steels
AS/NZS 1554.5 Structural steel welding – Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1594 Hot-rolled steel flat products
AS 1627.4 Metal finishing – Preparation and pretreatment of surfaces – Abrasive blast cleaning
AS 1627.9 Metal finishing – Preparation and pretreatment of surfaces – Pictorial surface preparation standards for painting steel surfaces
AS/NZS 231:2002 Guide to the protection of iron and steel against atmospheric corrosion by the use of protective coatings
NZS 3404.1 Steel Structures Standard
AS 3597 Structural and pressure vessel steel – Quenched and tempered plate
AS/NZS 3678 Structural steel – Hot-rolled plates, floorplates, and slabs
AS/NZS 3679.1 Structural steel – Hot-rolled bars and sections
AS/NZS 3679.2 Structural steel – Welded I section.
AS/NZS 4680 Hot dip galvanized (zinc) coatings on fabricated ferrous articles.
AS/NZS 5131 Structural steelwork – Fabrication and erection
GANZ Galvanizing Association of New Zealand – After-Fabrication Hot Dip Galvanizing. A practical reference for designers, specifiers, engineers, consultants, manufacturers, and users.
TS3404:2018 Durability Requirements for Steel Structures and components.